Printing - Brady BBP 35 User Manual

Printing

Printing
The Print function prints the file that is currently in the Editor. During printing, the print status
is displayed and the Editor is unavailable. When printing is complete, you are returned to the
Editor.
If there is no media or ribbon installed, printing does not start and you are prompted to install
media or ribbon. Likewise, if you open the cover during the print operation, printing stops and
a message displays prompting you to close the cover. The print job is canceled. To print the
label(s), you must restart the print job.
To print:
Touch Print
1.
In the Copies: field, enter the number of copies of the label to print.
2.
When ready to print, touch Start Print
3.
While the data is printing, the Print Status screen displays the printing progress. Once the data
has printed, you are returned to the Editor.
Where the labels are cut (cut between labels, or cut at the end of the job) depends on the
default parameters set in System Setup/Printing. (See
defaults.)
®
BBP 35/37 User's Manual
.
88
.
page 18 for information on setting
Rev A