Change Barcode; Size - Brady BBP 35 User Manual

In the Barcode dialog box, under Symbology:
Touch the up/down arrows in the scroll bar to the right of the barcode symbology to access
3.
more barcode types.
Touch the desired barcode type.
4.
Touch the Data value: field and enter the data the barcode represents.
5.
Select OK
6.

Change Barcode

To change the type of barcode after the barcode is established:
In the Editor, touch the barcode element.
1.
In the Barcode control panel, touch Change Barcode
2.
In the Barcode dialog box, touch the desired barcode type and change any of the barcode
3.
data as necessary.
When ready, touch OK
4.

Size

Sizing the barcode affects only the height (vertical length) of the barcode, from top to bottom.
To increase or decrease the height of the barcode:
In the Editor, touch the barcode element.
1.
In the Barcode control panel, touch Plus
2.
Rev A
Note:
If a typed character is invalid for the active symbology, the typed character
does not display. The cursor remains in the position (does not move forward) until a
valid character is entered.
.
to decrease the height.
Note:
The font type and size affects the height of the barcode. The barcode and the
human readable text must fit in the frame of the barcode element. As the size of the
human readable text increases, it decreases the height of the barcode.
.
to increase the height, or touch Minus
67
Formatting a Label
.
®
BBP 35/37 User's Manual