Setup
Time/Date
Units
1-46
The following settings can be found under the Time/Date menu in the Setup
function. Set the Time/Date options upon initial start-up of the printer.
Figure 1-9. Time/Date settings in Setup function
The Units setting is used to configure label parameter measurements for the
printer. The units are:
•
Inches
•
Millimeters
Once configured, you do not have to indicate "inches" or "millimeters" (or their
globally accepted abbreviations or marks) when entering numbers in data fields.
Likewise, in any scale or range of measurement field (using spinner boxes or in a
drop down list), the range of measurements will automatically configure to the
units selected in the Setup function.
®
BMP
61 Label Printer User's Manual