Power On/Off; Sleep Mode; Resetting The Printer - Brady BBP 35 User Manual

Power On/Off

To turn the display on or off:
Press Power
1.

Sleep Mode

To preserve energy, when the printer detects a time of inactivity it automatically turns off the
display and goes into a low-power consumption mode called Sleep Mode. The current label
and settings are retained.
To wake the printer from sleep mode:
Press
1.
The Editor displays the label or menu you were on when the printer went to sleep.
You can set the elapsed time of inactivity the printer should detect before entering Sleep Mode.
See page 19

Resetting the Printer

If the screen "freezes" (i.e., does not accept any keystrokes), reset the printer.
Press and hold
1.
The system performs the initialization process and starts the printer.
If the printer still does not initialize after holding the power button:
Using the On/Off switch, turn the power off, then turn it back on.
2.
Any data in the Editor at the time of the reset will be lost.
Rev A
.
Note:
To completely shut down the printer, turn the On/Off switch, located above
the power cord, to the OFF position.
or touch the screen.
Note:
If a label is defined when the system goes into sleep mode and the media is
changed to a supply where the label no longer fits, you will be prompted to make
the data fit or save the existing label before continuing. If you choose the option to
make the data fit, the system will move and/or resize the objects so they fit on the
new media size.
for information on setting the shut off delay time.
for 5 seconds.
11
Setting Up the Printer
®
BBP 35/37 User's Manual