Install Label Media (Tape) - Brady BBP 35 User Manual

Setting Up the Printer

Install Label Media (Tape)

To install label media:
Open the cover by pulling up on the bottom of the yellow latch.
1.
Swing the media wiper bar up, out of the tape well.
2.
Grasp the tape roll with the tape coming off the top of the roll and the touch cell on the
3.
left.
Drop the tape roll into the tape well, lining up the touch cell with the touch cell reader.
4.
®
BBP 35/37 User's Manual
The cover pops open quickly. To ease the opening, place a hand on the
cover as you release the latch.
CAUTION CAUTION
8 Rev A