Voice Command System Operation - Subaru Forester 2018 Manual

& Voice command system op-
eration
1. Press the talk switch on the steering
wheel.
After the voice command top screen has
been displayed, speech guidance will
commence.
NOTE
When the voice command mode is
audio mode, voice guidance for the
voice command system can be skipped
by pressing the talk switch on the
steering wheel.
2. Say the command.
Example (Say "PHONE")
NOTE
. Commands related with each func-
tion are displayed on the screen of the
each function tab. Some commonly
used commands are displayed on the
screen of the main tab. Even if any tab
is selected, all commands can be
operated.
. Saying "Help" prompts guidance to
offer examples of commands and op-
eration methods.
. To cancel voice recognition, select
"6", or press and hold the talk switch
on the steering wheel.
. If the system does not respond or
the confirmation screen does not dis-
appear, press the talk switch on the
Audio/Voice command system
steering wheel and try again.
. The notations used in the com-
mands are as follows.
– < >: Numbers, titles or names to
be spoken
! Voice command example: Call name
1. Press the talk switch on the steering
wheel.
2. Say "Call <contacts>" .
. A confirmation screen will be dis-
played showing the recognition results.
If multiple matching items are found, a
selection screen will be displayed. Say
"<number>" or select the number.
NOTE
. In the same manner as it is displayed
on the screen, "Call <contacts>", after
saying "Call a contact" say the name of
a contact. For example: "Call a con-
tact" , "John Smith" or "Call a contact" ,
"Mary Davis"
. Short or abbreviated names in the
contacts list may not be recognized.
Change names in the contacts list to
full names.
. Sometimes a voice recognition re-
sult confirmation screen will be dis-
played. After confirming the result, say
"Yes" or "No" .
. When the system recognizes multi-
– CONTINUED –
5-83