Disabling Or Enabling The Debug Mode - Avaya 1600 Series Administrator's Manual

Administering Deskphone Options
Use the following procedure to clear the deskphone of its administrative, user-assigned and options
values.
1. While the deskphone is on-hook and idle, press the following sequence of keys on the faceplate of
the deskphone:
Mute 2 7 2 3 8 2 5 3 2 7 # (Mute C R A F T C L E A R #)
!
Important:
2 7 2 3 8 is the default password. If you have changed that password by changing the
Important:
value of PROCPSWD, replace 27238 with the latest password.
Note:
Press the Mute button momentarily. Do not press this button while pressing other keys/
Note:
buttons.
The following text displays left-justified at the top of the display:
Clear all values?
*=no
2. If you do not want to clear all values, press * (no) to terminate the procedure and retain the current
values.
A screen displays the following prompt on the top line:
Are you sure?
*=no #=yes
3. Press the * button to terminate the procedure without clearing the values. Press the # button to
clear all values to their initial default values.
A confirmation tone sounds and the following text displays left-justified at the top of the display:
Clearing values.
The deskphone is cleared to its "out of the box" state.

Disabling or enabling the Debug mode

Note:
The Debug mode is available only on the 1616 deskphone.
Note:
With Release 1.3.3, the Debug mode is available only if you change the default CRAFT
password. You can change the password to any value between 0000 to 9999999.
84 1600 Series IP Deskphone Administrator Guide
#=yes