Disable/Enable Event Logging - Avaya 1600 Series Administrator's Manual

10. Enter a valid value between 0 and 999 for the new value of the DHCPOFFER wait period.
The deskphone displays:
Save new values?
*=no #=yes
11. Press the # button to save the new values you entered.
The deskphone displays:
New values
being saved
Once the new values are stored, the deskphone is reset.
If a new boot program is downloaded from the HTTP server after you enter static addressing
information, you must reenter your static addressing information.

Disable/Enable Event Logging

Use the following procedure to enable or disable logging of system events.
1. While the deskphone is on-hook and idle, press the following sequence of keys on the faceplate of
the deskphone:
Mute 2 7 2 3 8 5 6 4 # (Mute C R A F T L O G #)
!
Important:
2 7 2 3 8 is the default password. If you have changed that password by changing the
Important:
value of PROCPSWD, replace 27238 with the latest password.
Note:
Press the Mute button momentarily. Do not press this button while pressing other keys/
Note:
buttons.
2. After entry of the command sequence, the deskphone displays the following text, depending on the
current value of the system parameter NVLOGSTAT:
Log=status
*=change #=OK
where status is the type of logging indicated by the NVLOGSTAT value, defined as:
Status is disabled when NVLOGSTAT = 0
●
Status is emergencies when NVLOGSTAT = 1
●
Status is alerts when NVLOGSTAT = 2
●
Interface Control
Issue 6 August 2014 97