Activating The New Scope; Http Generic Setup - Avaya 1600 Series Administrator's Manual

Activating the New Scope

Use the following procedure to activate the new scope.
1. In the DHCP console tree, click the IP Deskphone Scope you just created.
2. From the Action menu, select Activate.
The small red down arrow over the scope icon disappears, indicating that the scope was
activated.

HTTP Generic Setup

You can store the same application software, script file, and settings file on an HTTP server as you can
on a TFTP server. TFTP is not supported for 1600 Series IP Deskphones. With proper administration,
the deskphone seeks out and uses that material. Some functionality might be lost by a reset if the
HTTP server is unavailable. For more information, see
!
CAUTION:
The files defined by HTTP server configuration must be accessible from all IP
CAUTION:
deskphones invoking those files. Ensure that the file names match the names in the
upgrade script, including case, since UNIX systems are case-sensitive.
Note:
Use any HTTP application you want. Commonly used HTTP applications include
Note:
®
Apache and Microsoft
!
Important:
You must use the Avaya Web configuration server to obtain HTTPS so information is
Important:
authenticated.
The Avaya Web configuration server does not support backup/restore. If you intend to
use HTTP for backup/restore purposes, you must use an HTTP server that is
independent of the Avaya Web configuration server.
To set up an HTTP server:
Install the HTTP server application.
●
Administer the system parameter HTTPSRVR to the address(es) of the HTTP server. Include
●
these parameters in DHCP Option 242, or the appropriate SSON Option.
DHCP and File Servers
®
IIS™.
HTTP Generic Setup
on page 37.
Issue 6 August 2014 49