Required Network Information - Avaya 1600 Series Administrator's Manual

Hide thumbs Also See for 1600 Series:
Table of Contents

Advertisement

Required Network Information

Before you administer DHCP and HTTP, and TLS, as applicable, complete the information in
you have more than one Gateway, HTTP/TLS server, subnetwork mask, and Gatekeeper in your
configuration, complete
The 1600 Series IP Deskphones support specifying a list of IP addresses for a gateway/router, HTTP/
HTTPS server, and Avaya Media Server Gatekeeper(s). Each list can contain up to 255 total ASCII
characters, with IP addresses separated by commas with no intervening spaces. Depending on the
specific DHCP application, only 127 characters might be supported.
When specifying IP addresses for the file server or media server, use either dotted decimal format
("xxx.xxx.xxx.xxx") or DNS names. If you use DNS, the system value DOMAIN is appended to the IP
addresses you specify. If DOMAIN is null, the DNS names must be fully qualified, in accordance with
IETF RFCs 1034 and 1035. For more information about DNS, see
and
DNS Addressing
Table 3: Required Network Information Before Installation - Per DHCP Server
1. Gateway (router) IP address(es)
2. HTTP server IP address(es)
3. Subnetwork mask
4. Avaya Media Server Gatekeeper IP
address(es)
5. Avaya Media Server Gatekeeper port
6. HTTP server file path
7. Deskphone IP address range
From:
To:
8. DNS server address(es)
9. HTTPS server address(es)
The file server file path is the "root" directory used for all transfers by the server. All files are uploaded to
or downloaded from this default directory. In configurations where the upgrade script and application
files are in the default directory, do not use item 6 in
As the LAN or System Administrator, you are also responsible for:
Administering the DHCP server as described in
Editing the configuration file on the applicable HTTP or HTTPS file server, as covered in
Series IP Deskphone Scripts and Application
Table 3
for each DHCP server.
on page 75.
DHCP Generic Setup
Although this can be a value between 0 and
65535, the default value is 1719. Do not change
the default value unless that value conflicts with
an existing port assignment.
If applicable.
If applicable.
Table
3.
Chapter 5: Server
Files.
Required Network Information
Table
on page 38
Administration.
Issue 6 August 2014
3. If
1600
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents