Administering Stations - Avaya 1600 Series Administrator's Manual

Avaya Aura Communication Manager Administration
and Craft Access Code (PROCPSWD). Administer these three parameters using Page 3 of the change
system-parameters ip-options form.
Avaya Aura Communication Manager Feature Administration
Feature
On-Hook Dialing
Auto Hold
Coverage Path
Enhanced Conference
Features

Administering Stations

This section refers to Avaya Aura Communication Manager administration on the Switch Administration
Terminal (SAT) or by Avaya Site Administration. Administer the following items on the Station form,
sample screens of which are provided in
features covered in this section because they optimize the user interface.
Release 1.1 supports the functionality introduced on Avaya Aura Communication Manager Release 5.2
that allows call server administration of the GROUP parameter on a station-by-station basis. As
covered in The GROUP System Value
with the 46xxsettings file to allow administration to apply to specific "groups" of deskphones. Before
Release 1.1, the Group Identifier had to be administered locally on each applicable deskphone. As of
Release 1.1, the Group Identifier can be administered centrally, and downloaded to each applicable
deskphone. The GROUP ID parameter is administered on page 3 of the Change Station Form. Once
downloaded, the Group Identifier takes effect starting with the next deskphone boot-up.
For sample Station Forms, see
32 1600 Series IP Deskphone Administrator Guide
Administration
Set up Avaya Aura Communication Manager so that the phone
supports on-hook dialing. Use the System Parameters Features
form page 10. Use the command Change
system-parameters features to view the form and make
the change.
Set up Avaya Aura Communication Manager to enable Auto
Hold, so that the phone automatically places an active call on
hold when the user answers or resumes a call on another call
appearance. Use the System Parameters Features form, page 6
Administer a coverage path for both phone demonstration and
normal operations. Use the Coverage Path form and give it a
number, for example, Coverage path 1. If Voice Mail is available,
this is also where you administer the hunt group or VDN,
depending on the type of Voice Mail system being used.
Enable enhanced conference display to support the user
experience for conferences. Block Enhanced Conference Display
on the Class of Restriction (COR) form must be set to No. Use
the command Change COR, followed by a number, to view the
form and make the change. a sample of the Class of Restriction
form.
Figure 1 through
on page 61, the GROUP Identifier can be used in conjunction
Appendix C: Sample Administration
Figure 4. Avaya recommends setting the
Forms.
.