Avaya 1600 Series Administrator's Manual page 80

Table 9: 1600 Series IP Deskphone Customizable System Parameters (continued)
Parameter Name
STATIC
SUBSCRIBELIST
TPSLIST
UNNAMEDSTAT
VLANSEP
VLANTEST
Administering Options for the 1600 Series IP Deskphones
Default Value Description and Value Range
0 Static programming override flag. If set to "0" static
programming never overrides call server (DHCP) or
call server administered data. If set to "1" static
programming overrides only file server administered
data. If set to "2" static programming overrides only call
server administered data. If set to "3" static
programming overrides both file server- and call
server-administered data. Allows a call server IP
address that has been manually programmed into a
deskphone to override any value received via DHCP or
via this configuration file. A manually programmed IP
address will only be used if it is not 0.0.0.0, so this
parameter may be used to allow only specific
deskphones to use a different value than otherwise
provided by this configuration file. If STATIC is to be
used to select a manual override of file server IP
address(es), STATIC must be set via DHCP, not via
this configuration file.
" " (Null) One or more Push application server subscription
URLs, separated by commas without any intervening
spaces (0-255 ASCII characters, including commas).
" " (Null) One or more trusted domain/path strings, separated by
commas without any intervening spaces (0-255 ASCII
characters, including commas). A URL pushed to a
deskphone must contain one of these strings if it is to
be used to obtain content to be rendered by the
deskphone.
1 Unnamed Registration Status. Specifies whether
unnamed registration is initiated if the user fails to enter
a value at the Extension: prompt or Login screen.
Unnamed registration provides the deskphone with a
TTI-level service, enabling a user, for example, to dial
emergency services like 911. Value 1=Yes, 0=No.
1 VLAN separation. Controls whether frames to/from the
secondary Ethernet interface receive IEEE 802.1Q
tagging treatment. The tagging treatment enables
frames to be forwarded based on their tags in a
manner separate from deskphone frames. If tags are
not changed, no tag-based forwarding is employed.
Values are: 1=On/Enabled, 0= Off/Disabled. This
parameter is used with several related parameters. For
more information, see
60 Number of seconds to wait for a DHCPOFFER when
using a non-zero VLAN ID (1-3 ASCII digits, from "0" to
"999").
VLAN Separation on page 73.
Issue 6 August 2014
7 of 7
71