Remote Access - AT&T EL42208 User Manual

1.
Dial your telephone
number from any touch-
tone telephone.
2.
When the system answers,
enter two digit remote
access code (19 unless
you have changed it).
3.
Enter remote commands
(see list at right).
4.
Hang up to end the call
and save all undeleted
messages.
NOTE: If you pause for
more than four seconds
during remote access,
you will hear a help
menu listing all features
and commands. If there
is no command entered
for another 15 seconds,
the call will end
automatically.
Answering system

Remote access

A two digit security code is required to access
your answering system from any touch-tone
telephone. This code is 19 by default, see
Changing feature options (page 36) to change it.
Play all messages
1
Play new messages
2
Delete the message
3
33
Repeat or go back
4
Stop
5
Skip to next message
6
Record announcement
*7
to begin recording
5
to stop recording
Help menu
*5
Turn system off
0
Turn system on
0
Exit
8
41
Press to hear all messages.
Press to hear new messages.
Press once during playback to
delete current message. Press
twice to delete all old messages.
Press during the caller's
message to repeat the message.
Press during the beginning of
the day and time announcement
to go back to the previous
message.
Press to stop any operation (stop
playback, stop recording).
Press to skip the current
message and advance to next
message.
Press *7, wait for the beep, then
begin speaking. Press 5 to stop
recording and hear the playback
of new announcement.
Press to hear list of features &
commands.
Press to turn off answering
system. Incoming calls will no
longer be answered.
If off, system will answer after
10 rings. Enter your access
0
code, then press
answering system on.
8
Press or hang up to end the
remote access call.
to turn the