Battery Installation & Charging - AT&T EL42208 User Manual

Getting started
Battery installation & charging
Install the battery as shown below. After installing the battery, you can make
and receive short calls, but replace the handset in the telephone base or
charger when not in use. For optimal performance, charge the handset battery
for at least 16 hours before use. When fully charged, the handset battery
provides approximately five hours of talk time or six days of standby time.
If the handset has not been used for a long time or if the battery inside is
completely depleted, put it on the telephone base or charger for recharging.
Step 1
Insert the battery plug as
indicated, making sure that
it matches the color-coded
label inside the battery
compartment.
Step 4
Charge the handset, by placing the
handset face up in the telephone
base. The CHARGE light on the
handset should be on as soon as
the handset is properly placed on
the telephone base.
Step 2
Place the battery
and wires inside the
compartment.
CHARGE
light
9
Step 3
Slide the battery
compartment cover
up until it clicks.
MENU / SEL
TRANSFER
ANNC. RECORD
REMOVE