Related Manuals for Horizon Fitness Andes6
Summary of Contents for Horizon Fitness Andes6
- Page 1 Andes Andes ELLIPTICAL OWNER’S MANUAL Read the ELLIPTICAL gUIdE before using this OWNER’S MANUAL.
- Page 2 ASSEMBLY WarninG There are several areas during the assembly process that special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the elliptical could have frame parts that are not tightened and will seem loose and may cause irritating noises.
-
Page 3: Pre-Assembly
F 2 Upper Handlebars Set F 1 Console Mast Set Unpack the product where you will be using it. Place the elliptical carton on a level flat Andes6 Andes6 F 1 Console Box surface. It is recommended that you place a protective covering on your floor. Never... -
Page 4: Assembly Step
ASSEMBLY Step 1 ASSEMBLY Step 2 pre-attacHeD HarDWare partS: pre-attacHeD HarDWare partS: CONSOLE MAST CONSOLE Andes6 Andes6 SCREW (A) WASHER (A) SCREW (B) M8 x 1.25P x 16 L 8.4 x 17.0 x 1.0T M4 x 0.75P x 12L SCREW (C) HEXAGON L Andes8 Qty: 4... - Page 5 ASSEMBLY Step 3 pre-attacHeD HarDWare partS: Andes6 Andes6 SCREW (D) HEXAGON L Andes8 UPPER HANDLEBARS Andes8 M10 x1.5P x 10L WRENCH #5 Qty: 4 (W/SCREW DRIVER) Use HEXAGON L WRENCH #5 to remove PRE-AttACHEd SCREWS (d) from UPPER SCREW(D) HANdLEBARS. Attach UPPER HANdLEBARS to LOWER HANdLEBARS with PRE-AttACHEd SCREWS (d).
-
Page 6: Folding Instruction
Use right hand to grip the handle, push forward gently. Use right hand to grip the handle. Pull up on the handle to release. Andes6 Pull up until guide rail set locks into place. Andes6 Pull back to fold down. -
Page 7: Moving The Elliptical
MoVinG tHe elliptical ELLIPTICAL OPERATION Andes6 This section explains how to use your elliptical’s console and programming. Andes8 The BASIC OPERATION section in the ELLIPTICAL gUIdE has instructions for the following: • location oF tHe elliptical • poWer/GroUnDinG inStrUctionS • Foot poSitioninG • MoVinG tHe elliptical • leVelinG tHe elliptical • p oWer/ManUal incline operation •... - Page 8 5 seconds hold 1) Make sure the power is on. • Increase 2) Simply press the “START” key and begin exercising. • Next item Andes6 Andes6 Andes8 Andes8 SetUp YoUr perSonal Data This console is able to store your personal data which includes name, gender, age and weight. This allows you to start your workout •...
-
Page 9: Program Profiles
proGraM proFileS proGraM proFileS • WeiGHt loSS: Promotes weight loss by raising and • USB interFace: There is a USB port on the back side of • ManUal: Allows you to adjust the resistance level to • Hrc 2: Benefits weight loss by maintaining an optimum lowering the resistance level, while keeping you in your console. -
Page 10: Monitoring Your Heart Rate
Your Horizon Fitness elliptical trainer offers two heart rate feedback options. You may choose to use the heart rate handlebars, or the level for you to monitor your progress. - Page 11 proDUct Spare part liSt proDUct Spare part liSt ItEM NO. dESCRIPtION ItEM NO. dESCRIPtION ItEM NO. dESCRIPtION ItEM NO. dESCRIPtION CONSOLE MAST SET;SEMI-ASSY;EP247-2KM CAP;STABILIZER;PVC; Ø60 X 2T;BLF54 CONSOLE WIRE;1100(150+400+150) WRENCH;HEX;L-TYPE;#4X70L PEdAL ARM SET;R;SEMI-ASSY;EP247-2KM FOOT PAd;STABILIZER;R;FRONT;CB131 WIRE RPM 280MM AdAPTOR;USA;100-240V 12V/2A ;HZ PEdAL ARM SET;L;SEMI-ASSY;EP247-2KM SCREW;BH;Ø5 X 15L;SM;PH;BZN;POT SCREW;BH;...
-
Page 12: Exploded View
eXploDeD VieW 4-B45 4-B44 2-B48... - Page 13 ELLIPTICAL OWNER’S MANUAL Andes 6 & Andes 8 Owner’s Manual 102710 Rev. 1.2 © 2010 Horizon Fitness...