Wall Mounting - AT&T E5927B User Manual

Getting Started

Wall mounting

The base can be installed on any standard wall-phone outlet as shown below. Choose a
location away from electronic equipment, such as personal computers, computer rout-
ers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture.
1) Connect telephone line cord
and power adapter to tele-
phone jacks and wall jacks, as
shown on page 9.
2) Install wall mount bracket onto
set. First put the two front
wall-mount-bracket tabs into
the front notches on bottom of
telephone base, then squeeze
the rear tabs of the wall mount
bracket as you insert them into
the rear notches on the bottom
of the telephone base.
Plug power adapter into an electrical
outlet not controlled by a wall switch.
3) Position the wall mount brack-
et over the wall outlet mount-
ing pegs, and press and slide
the wall mount bracket down
firmly so it is held securely on
the outlet mounting pegs.
Plug telephone line
cord into the telephone jack.
11