Table of Contents
Advertisement
Getting started
Wall mounting
The telephone base comes with the bracket mounted for tabletop use. If wall-
mounting is desired, follow the directions below.
1..To. remove. the. bracket,. hold. the. telephone.
base.in.both.hands,.press.the.two.bracket.tabs.
and.lift.the.bracket.away.from.slots. .and. .
3.. To. attach. the. bracket. for. wall. mounting,.
insert.the.tabs.of.the.bracket.into.the.slots.
. and. . on. the. telephone. base,. then.
press. the. other. bracket. tabs. into. slots. . .
and. .as.shown.on.the.right.
4.. Plug. the. power. adapter. into. an. electrical.
outlet.not.controlled.by.a.wall.switch..Plug.
the. telephone. line. cord. into. a. telephone.
wall.jack..To.mount.the.telephone.on.the.
wall,. position. the. mounting. holes. . and.
. over. the. wall. outlet. mounting. pegs..
Press. and. slide. the. bracket. down. firmly.
so. the. telephone. is. held. securely. on. the.
telephone.outlet.mounting.pegs.
NOTE: To.change.back.to.tabletop.mounting,.remove.the.telephone.
base.from.the.wall.and.remove.the.bracket.from.the.telephone.base.(see.step.
1)..Unplug.the.cords.from.the.wall.jacks..Insert.the.bracket.tabs.into.the.slots.
.and. . on.the.telephone.base,.then.press.the.other.bracket.tabs.into.the.
slots. .and. ..Connect.the.telephone.line.cord.and.power.adapter.(see.page.
7).
2.. Connect. the. telephone. line. cord. and. power.
adapter. to. the. jacks. on. the. bottom. of. the. tel-
ephone. base.. Wrap. the. cords. as. shown.. Put.
the.telephone.line.into.the.bracket.
Telephone outlet mounting pegs
9
Advertisement
Table of Contents
