Wall Mounting - AT&T E1128 User Manual

Getting Started Getting Started

Wall mounting

The base can be installed on any standard phone outlet as shown below. Choose a loca-
tion in a central location within the home, away from electronic equipment such as per-
sonal computers, computer routers, television sets or microwave ovens. Avoid excessive
heat, cold, dust or moisture.
1) Connect telephone line cord and AC
power cord to telephone jack and wall
jacks, as shown on
page 6.
2) Install wall mount bracket onto set. First
put the two front wall-mount-bracket tabs
into the front notches on bottom of tele-
phone base, then squeeze the rear tabs of
the wall mount bracket as you insert them
into the rear notches on the bottom of the
telephone base.
NOTE: To disassemble the wall
mount bracket, squeeze the rear
tabs while lifting up the wall mount bracket
back and away from the telephone base.
Plug power adapter
into electrical outlet.
3) Position the wall-
mount bracket over the
wall-outlet mounting
pegs, and press and
slide the wall-mount
bracket down firmly so it
is held securely on the
outlet mounting pegs.
Plug telephone line
cord into telephone cord
wall jack.
8 8