Announcement Only Mode - AT&T E5927B User Manual

A
"A" is displayed when
Announcement Only is activated.
1.
SETUP
"Announcement only, record
no messages. To change the
setting press CHANGE."
2.
CHANGE
"Off"
3.
CHANGE
"On"
4.
(Play/Stop)
Beep
(Option selected).
Answering System Operation Answering System Operation

Announcement Only mode

In Announcement Only mode, callers hear an announce-
ment but cannot leave messages.
To turn Announcement Only on or off
Press repeatedly until you hear
SETUP
"Announcement only, record no messages. To
change the setting press CHANGE". Then press
until you hear the option you want (on or off).
CHANGE
Press
PLAY/STOP
press again to modify other features (see page
SETUP
34).
To record your outgoing announcement
When Announcement Only is turned on, calls are
answered with a pre-recorded announcement that says
"We're sorry, messages to this number cannot be
accepted". You can use this announcement, or replace
it with a recording of your own voice.
After turning on the Announcement Only feature, fol-
low the steps on page 32 to record your announce-
ment. Callers will hear this announcement only when
the announcement only feature is turned on. Otherwise
they will hear the standard announcement asking them
to leave a message.
33 33
to store your selection and exit, or