Message Playback - AT&T E5927B User Manual

Number of messages (or, during
playback, message number cur-
rently playing).
Press PLAY/STOP to begin or
end message playback.
1.
(Play/Stop)
"You have [xx] new
messages and [xx] old
messages."
Message playback begins. See
options at right.
2.
(Play/Stop)
Message playback ends.
NOTE: If "F" is flashing in
the message window,
memory is full. You will have to
delete some messages before
new ones can be recorded.
NOTE: New (unheard) mes-
sages cannot be deleted.
Answering System Operation Answering System Operation

Message playback

Press
PLAY/STOP
announces the number of messages, then begins play-
back.
If you have new messages, you will hear only the new
messages (oldest first). If there are no new messages,
the system will play back all messages (oldest first).
Announcements
• When playback begins, you will hear the total
number of messages.
• Before each message, you will hear the day and time
it was received.
• After the last message, you will hear "End of mes-
sages". If the system has less than five minutes of
recording time left, it will announce the remaining
time.
Options during playback
• Press the
VOLUME
• Press to skip to next message (or hold down to
SKIP
speed up message playback).
• Press
REPEAT
Press twice to hear previous message (or hold down
to slow message playback).
• Press
DELETE
• Press
PLAY/STOP
To delete all messages
To delete all messages, press and hold
the phone is idle (not during a call, or during message
playback).
35 35
to hear messages. The system
button to adjust speaker volume.
to repeat message currently playing.
to delete message being played back.
to stop playback.
while
DELETE