Appendix
Replacing a handset
If you are replacing a handset on a system that has the maximum number of registered
handsets (4) or wish to change the assigned handset number of your registered hand-
sets, you must first de-register the handsets, then re-register all handsets.
To de-register all handsets
• Press and hold
light starts to turn on then flash (about 10 seconds), then release the
button.
LOCATOR
• Press and release
few seconds, all handsets will be de-registered.
• All handsets will show NOT REGISTERED if de-register was successful.
NOT REGISTERED
NOTE: If the de-register process was not successful you may need to reset the system and try again. To reset:
pick up the handset and press the PHONE button, then press the OFF button and place the handset back into
the cradle.
NOTE: You can only deregister handsets when the handsets and the base are not being used.
NOTE: To re-register the handset to the telephone base follow the registration instructions on page 43.
HANDSET LOCATOR
HANDSET LOCATOR
on the main telephone base until the
again. The
IN USE
44
IN USE
HANDSET
light will turn off and in a