Adjusting the projected image
Adjusting the image position
The projected image position and size can be adjusted manually from the control panel or the
remote control unit. Refer to the following guides to adjust picture position manually.
LENS SHIFT
1. Press the
direction key to ship the projected image directly.
2. If the lens shift is operated via remote control, use
Zoom/Focus, arrow buttons to adjust Lens shift setting.
Fine-tuning the image size and clarity
ZOOM +
1. Press the
or
projected imaged as you desired.
2. Sharpen the picture by pressing
remote control.
key on the remote control to bring up the Lens Shift window or press
ZOOM-
button on the control panel or the remote control to adjust the
FOCUS+
FOCUS-
or
ENTER
button to switch Lens shift and
button on the control panel or the
31