Turning Off The Projector - BenQ PX9510 User Manual

This function is only available when a PC signal (analog RGB) is selected.

Turning off the projector

If the projector is no longer required, it is important to shut it down correctly to avoid damage or
unnecessary wear and tear to the projector. Refer to the following guide to turn the projector off.
• Do not unplug the power cable from the wall outlet or projector when the projector is powered on, it may cause
damage to the AC IN connector of the projector and (or) the prong plug of the power cable.
• Do not turn off the AC power supply within 10 seconds of making adjustment or setting changes and closing the
menu, it may cause loss of adjustments and settings and return to default.
POWER
1. Press the button on the control panel or
POWER
2. Press the or
operate (cooling-off time) and the power LED flashes orange. The cooling fans stop.
Main Power
3. Press the
OFF
button again to verify power off, the cooling fans continue to
switch to the off position (O) to turn off the projector.
OFF
button on the remote control.
33