Remote Control And Functions - BenQ PX9510 User Manual

Remote control and functions

Wired remote jack
Name Function
Status LED Lights when the remote control is used
ON
Turn the projector on
OFF
Turn the projector off (standby mode)
FOCUS+ Focus the projection image
FOCUS- Focus the projection image
ZOOM + Increase the projection image size
ZOOM - Reduce the projection image size
TEST PATTERN
Test Pattern selection
LENS SHIFT
Adjust lens shift range
UP Move OSD cursor up
RIGHT Move OSD cursor right or enter submenu
DOWN Move OSD cursor down
LEFT Move OSD cursor right or enter submenu
ENTER
Select or change setting in the OSD
MENU
Display OSD main menu
RETURN
Return to last OSD page or exit menu
INPUT
Select input source to be displayed
PICTURE
Display picture menu
NETWORK
Display Network Settings menu for
configuration
AUTO
Auto adjustment for phase, tracking, size,
position
ASPECT
Set up aspect ratio of the projected image
OVERSCAN
Enable or disable the overscan function
FREEZE
Freeze/unfreezes the on-screen picture
3D MODE
Open the 3D Mode menu
INFO.
Display the Information menu
LIGHT
Illuminates the buttons on the remote control
for 10 seconds.
BLANK
Enable or disable the display image function
LAMP MODE
Display the Lamp Settings menu
Connect the remote cable to the jack on the
projector
Wired remote jack
11