Making Connections; Preparations; Connecting Dvi-D Devices - BenQ PX9510 User Manual

Making connections

Preparations

When connecting a signal source to the projector, be sure to:
1. Turn off all equipment before making any connections.
2. Use only the correct type cables for each source with proper type plugs.
3. Ensure that all cable plugs are firmly fitted to the equipment jacks.
Note that all cables shown in the following connection diagrams may not be supplied with the projector (See "Shipping
contents" on page 7). Most cables are commercially available from electronics stores.

Connecting DVI-D devices

DVI-D (Digital Visual Interface) supports uncompressed video data transmission between
compatible devices like DTV tuners, DVD players and displays over a single cable. It provides pure
digital viewing and listening experience. You should use an DVI-D cable when making connection
between the projector and DVI-D devices.
To make sure you select a correct input source type for the DVI-D signal.
DVI-D Cable
DVI-D device: DVD player, digital tuner, etc.
22