Selecting an input source
The projector can be connected to multiple equipment at the same time. When the projector
is first turned on, it will attempt to reconnect with the input source which was in use when the
projector was last shut down.
To select the video source
The input source can be selected from the projector's control panel or from the remote control.
Refer to the following guide to select the desired input source.
1. Press
INPUT
key on the remote control or control panel to display
2. Select your desired input source via ▲/▼ key.
ENTER
3. Press
key to confirm the source, it will take few seconds to detect the desired input
signal and display the projected image.
RETURN
Press
key to projected image if you want to keep current input source.
If you want the projector to automatically search for the signals, select
Auto Search
menu.
Source
menu.
On
Signal
in the
>
29