Message Alert Tone - AT&T DECT EL52419 User Manual

Handset settings
Answering system settings

Message alert tone

When the message alert tone is set to ON, and there is at least one new
message, the telephone base beeps every 10 seconds. Unless you change it,
the message alert tone is set to off.
To change the setting:
1. When the handset is in idle mode, press MENU/
enter the main menu.
2. Press /SELECT again.
MENU
3. Press qCID or DIRp to scroll to >ANS SYS SETUP, then
press /SELECT.
MENU
4. Press qCID or DIRp to scroll to >MSG ALERT TONE, then
press /SELECT.
MENU
5. Press qCID or DIRp to choose between ON and OFF.
6. Press /SELECT to confirm your setting. A confirmation
MENU
tone sounds.
NOTES:
1. The message alert tone beeps only if all the conditions below are met:
- Answering system is on.
- Message alert tone setting is on.
- There are new messages.
2. To temporarily turn off the message alert tone, see page 38.
SELECT
18
to
>ANS. SYSTEM
DIRECTORY
>ANS SYS SETUP
PLAY MSGS
>MSG ALERT TONE
ANSWER ON/OFF
MSG ALERT TONE
ON