Handset Operation; Speakerphone Information; Last Number Redial - AT&T DECT EL52419 User Manual

Telephone operation

Handset operation

Speakerphone information

During a call, press
and normal handset use. Press
NOTES:
1. If you use the speakerphone during LOW BATTERY mode, the
handset is not lit except for the
2. The speakerphone uses more power than the normal handset.
If the handset battery becomes very low while you are using
the speakerphone, the call remains in speakerphone mode
until you hang up or the battery becomes depleted. When
the battery is very low, you cannot switch a call from normal
handset use to speakerphone mode.
3. After installing the battery into the handset, the screen may
show LOW BATTERY. If you use speakerphone at this time,
the battery may become depleted. Follow the instructions in
the Battery installation & charging section on pages 5-6.

Last number redial

To view the recently dialed numbers:
• To display the most recently called number (up to 30 digits),
press REDIAL/
• To view up to five recently called numbers, press
REDIAL/
PAUSE
REDIAL/
PAUSE
The handset beeps twice at the beginning and at the end of the list.
OFF/
Press
CLEAR
To redial a number:
• To dial the displayed number, press
-OR-
• You can call the most recently called number by pressing
or SPEAKER, then pressing REDIAL/
While reviewing the redial memory, press
displayed number.
SPEAKER to switch between hands-free speakerphone
.
PAUSE
then press qCID or DIRp, or press
repeatedly.
to exit.
OFF/ to hang up.
CLEAR
SPEAKER button.
PHONE/
.
PAUSE
/DELETE to delete the
MUTE
20
PHONE
REDIAL
or SPEAKER.
FLASH
PHONE/
Elapsed
time
0:00:30
888-883-2445
FLASH