Light Switch; Eng. Stop Switch - KTM 450 SX 2009 Owner's Manual

CONTROL ELEMENTS

Light switch

5.6

ENG. STOP switch

5.7
The light switch
Possible states
High beam on – Light switch is turned upwards. In this position, the high
beam and the tail light are switched on.
Low beam on – Light switch at the middle setting. In this position, the low
beam and tail lights are switched on.
Lights off – Light switch has been turned down. In this position, all lights
are switched off.
700379-01
The ENG. STOP switch
Possible states
Ignition off OFF – In this position, the ignition circuit is interrupted, a running engine
•
stops, and the engine cannot be started.
Ignition on RUN – In this position, the ignition circuit is closed and the engine can be
•
started.
100030-10
is fitted on the left side of the handlebar.

is fitted on the left side of the handlebar.

32