Table of Contents
Advertisement
CLEANING
–
After rinsing the vehicle with a gentle water spray, allow it to dry thoroughly.
–
Clean and dry the air filter box.
–
Empty the carburetor float chamber.
Warning
Danger of accidents Reduced braking due to wet or dirty brakes.
–
Clean or dry dirty or wet brakes by riding and braking gently.
–
After cleaning, ride the vehicle a short distance until the engine warms up, and then apply the brakes.
Info
The heat produced causes water at inaccessible positions in the engine and the brakes to evaporate.
–
Push back the protection covers on the handlebar instruments to allow water to evaporate.
–
After the vehicle has cooled off, oil or grease all moving parts and bearings.
–
Clean the chain. (
p. 96)
–
Treat bare metal parts (except for brake discs and exhaust system) with anti-corrosion materials.
Cleaning and polishing materials for metal, rubber and plastic (
–
Treat all painted parts with a mild paint polish.
High-luster polish for paint (
–
To prevent electrical problems, treat electric contacts and switches with contact spray.
Contact spray (
p. 194)
x
(
p. 157)
p. 195)
p. 194)
172
Advertisement
Table of Contents
