KTM 450 SX 2009 Owner's Manual page 122

MAINTENANCE ON CHASSIS AND ENGINE
–
Check that sliding plate
the brake linings.
Info
Make sure that decoupling plate
pad.
300265-10
–
Grease bearing bolt
caliper support
Lubricant (T625) (
100068-10
–
Swing the brake caliper downward. Mount and tighten the screw.
Guideline
Screw, rear brake caliper
–
Operate the foot brake lever repeatedly until the brake linings lie on the brake disc and
there is a tight spot.
100069-10
is seated correctly in the brake caliper support and insert

is mounted on the piston side of the brake

and insert the brake caliper with the bearing bolt into brake

.

p. 195)
M6 10 Nm Loctite ® 243™
(7.4 lbf ft)
120