Changing The Fuses Of Individual Power-Consuming Components - KTM 450 SX 2009 Owner's Manual

MAINTENANCE ON CHASSIS AND ENGINE

Changing the fuses of individual power-consuming components

9.59
–
The main fuse
–
Remove protection covers
–
Remove the faulty main fuse.
Info
You can recognize a blown fuse by its broken filament
Warning
Fire hazard The electrical system can be overloaded by the use of incorrect
fuses.
–
Use only fuses with the prescribed amperage. Never by-pass or repair fuses.
–
Insert a new fuse.
Fuse (58011109120)
Info
If the new fuse burns out, contact an authorized KTM workshop.
Tip
300257-10
The spare fuse
able if needed.
–
Replace the protection covers.
–
Remove the front cover. (
–
Switch off all power-consuming components and switch off the engine.
is located in the starter relay

.

should always be present in the starter relay so that it is avail-

p. 137)
in front of the battery.

.

130