Table of Contents
Advertisement
MAINTENANCE ON CHASSIS AND ENGINE
–
Remove the four screws
and set it down.
–
Remove nuts
–
Remove screws
–
Remove screws
–
Place handlebar bridge
tighten screw
Guideline
Screw, steering bridge
–
Mount and tighten screw
Guideline
Screw, steering column, top
–
Mount and tighten screws
Guideline
Screw, steering bridge
100099-10
–
Mount handlebar support
locking nuts
Guideline
Nut, handlebar support
. Remove handlebar clamps
and remove handlebar support
and
.
. Remove handlebar bridge
onto the steering column in the desired position. Mount and
.
.
.
in the desired position using the screws. Mount new self-
and tighten.
, swing the handlebar forward
with the screws.
.
M8
20 Nm
(14.8 lbf ft)
M20x1.5
25 Nm
(18.4 lbf ft)
M8
20 Nm
(14.8 lbf ft)
M10
45 Nm
(33.2 lbf ft)
93
Advertisement
Table of Contents
