KTM 450 SX 2009 Owner's Manual page 126

MAINTENANCE ON CHASSIS AND ENGINE
Info
Proceed in the same way on the other wheels if necessary.
–
Position the wheel on the hub.
Info
Note the direction of travel of the front wheels.
Carefully position the wheel on the hub, being careful not to damage the threads
of the screws.
–
Mount wheel nuts
–
Remove the vehicle from the work stand. (
–
Pull handbrake lever, push the locking pawl
lever. (Figure 100006-10
–
Tighten the wheel nuts crosswise.
Guideline
Wheel nut
300278-10
but do not tighten.

p. 64)

p. 30)
M10x1.25
downwards, and release the handbrake
45 Nm
(33.2 lbf ft)
124