Log Placement - Heat & Glo ST-HVBI-AUB Owner's Manual

1.9 LOG PLACEMENT

1
5
2
CAUTION:
Logs are fragile. Carefully remove the log packages from the heater and the tags from their packages. Handle
logs gently. Place the logs in the heater by following the steps shown. Replace the glass door and dress guard previously
removed prior to lighting the unit. Be certain the gas logs are properly positioned. Logs #4 and #5 are the same log. See
Service Parts pages for individual assembly photos.
1
LOG #1 (SRV2068-700):
that the bottom grooves fi t over bars and the log is snug against the grate tabs.
2
LOG #2 (SRV2068-701):
log against grate tabs on fi rst and second bars.
26
4
3
6
Place log #1 behind grate tabs on the second and third grate bars on the left rear corner. Position so
Locate log #2 in left front corner of the log grate using bottom grooves for placement. Push
Heat & Glo • ST-HVBI-AUB • 2082-980 Rev. Q • 5/15
Log Assembly: LOG-ST-CE
TABS
1
2