Log Placement - Heat & Glo ATS-AU-D Installation And Operation Instructions Manual

Log Assembly: 327-700A
Model: ATS-AU-D
Remove dress guard and glass door from heater.
Carefully remove logs from cardboard.
CAUTION: Logs are fragile!
LOG #1 (SRV327-701):
tab. The left end of the log is positioned by the two bend up tabs shown in Photo A.
Place log #1 in the back of the heater, locating it's slot on the right over the protruding
Heat & Glo • ATS-AU-D • 327-900 Rev. F • 6/09

LOG PLACEMENT

4
2
Photo A
INSTRUCTIONS
1
3
6
5
11