Positioning The Logs; Log Placement Instructions - Heat & Glo SL-750TRS-IPI-D Owner's Manual

F. Positioning the Logs
LOGS-350
Model: SL-350TRS-C
1 1 1 2 2 2
LOG #1 (SRV530-701): Place log #1 between the two tabs on the grate. (DVT and TRS models: for NG pull log #1 to the
front tab, for LP push log #1 to the back tab); (TV models: for both NG and LP push log #1 to the back tab and then lean
log #1 backwards onto the back of the rebox). The right side of the log should be ush with the edge of the third grate bar
from the left.
LOG # 2 (SRV530-704): Position log #2 on the far right of the burner/grate. With the "burned-out" portion of the log facing
left and the at part facing down, place the back end of the log against the burner tab and position the "forked" end of the
log straddling the far right grate bar.
Heat & Glo • SL-750TRS-IPI-D, SL-550TRS-IPI-D, SL350TRS-C • InD • 2065-985 Rev. o • 3/07
3 3 3 4 4 4 5 5 5
LOG PLACEMENT
INSTRUCTIONS
1
1
Flush with grate bar.
2 2
541-935B 8/00
45