Positioning The Logs; Log Placement Instructions - Heat & Glo SL-350TRS-CE-D Installer's Manual

LOG PLACEMENT
Log Set Assembly: LOGS-350CE-D
INSTRUCTIONS
1
4
2
5
3
6
Carefully remove the logs from the packaging. CAUTION: Logs are fragile!
1
1
LOG #1 (SRV327-701):
Place log #1 at the rear of the unit, with the left edge behind the tab on the pilot
bracket. The right side sits behind the tab on the support bracket.
2
2
LOG #2 (SRV2033-701):
Locate the bottom groove of log #2 over the left most grate bar and align over
the burner by placing the log slot over the burner tab as shown.
34