Log Placement Instructions - Heat & Glo SL350TRSI-N-CE Owner's Manual

E. Log Placement Instructions
2
3
Carefully remove the logs from the packaging. CAUTION: Logs are fragile!
LOG #1 (SRV327-701): Place log #1 at the rear of the unit, with the left edge behind the tab on the pilot bracket. The right
side sits behind the tab on the support bracket.
2
LOG #2 (SRV2033-701): Locate the bottom groove of log #2 over the left most grate tine and align over the burner by placing
the log slot over the burner tab as shown.
1
4
5
6
1
Heat & Glo • SL350TRSI-N-CE, SL350TRSI-PB-CE • 2033-980 Rev. L • 3/14
Log Assembly: LOGS-350CE-D
PILOT
BRACKET TAB
BURNER TABS
1
2
SUPPORT
BRACKET
65