NAPCO Gemini GEM-P816 Programming Instructions Manual page 17

WI995C 2/04
SYSTE M OPT ION S (A DDRESS 0460-0 485 & 1054)
SYSTEM RESPONSE
ACTIVATED BY GLOBAL
EVENT/TROUBLE
Alarm Output
Pulsed Alarm Output
PGM1 Output
PGM2 Output
Report Event Telco 1
Report Restore Telco 1
Report Event Telco 3
Report Restore Telco 3
[Default = blank (•) from address 0460-0469].
SYSTEM RESPONSE
ACTIVATED BY AREA 1
EVENT/TROUBLE
Pulsed Alarm Output
Alarm Output
PGM1 Output
PGM2 Output
Report Event Telco 1
Report Event Telco 3
[Default = blank (•) from address 0470-0477] * NOTE: Keypad Aux. is not to be selected for UL Installations.
SYSTEM RESPONSE
ACTIVATED BY AREA 2
EVENT/TROUBLE
Pulsed Alarm Output
Alarm Output
PGM1 Output
PGM2 Output
Report Event Telco 1
Report Event Telco 3
[Default = blank (•) blank (•) from address 0478-0485] * NOTE: Keypad Aux. is not to be selected for UL Installations.
!
1. Select the desired option entering the option number (1-8) for each digit.
!
2. Enter corresponding option number in address location.
!
NOTE: Dark shaded data value box shows option not available. Press
ADDRESS 1054
Global
1st digit 2nd digit
Ambush Code
[Default = blank (•) blank (•)]
L
NAPCO Security Systems
TEST TELCO
ADDR
TIMER FAILURE
1 2
0460
0461
0462
0463
0464
0465
0468
0469
Note: If Test Timer is enabled (above), Digital Dialer Test is also enabled.
KEYPAD
ADDR
AMBUSH
PANIC
1 2
0470
0471
0472
0474
0475
0477
KEYPAD
ADDR
AMBUSH
PANIC
1 2
0478
0479
0480
0482
0483
0485
GLOBAL AMBUSH CODE: It is the 2-digits entered immediately prior to the regular disarm code. If
"Enable Global Ambush Code" (Address 0720) is selected and Address 1054 is left blank (•), then the
2-digit Global Ambush Code is "99". If "Enable Global Ambush Code" is selected and Address 1054
is not left blank (•), then the 2-digit Global Ambush Code is the two digits entered in address 1054.
!
Enter in address location (both 1st and 2nd digits); valid entries are 1-9. 3. Press
save.
GLOBAL SYSTEM EVENT/TROUBLE
RF RCVR. MEMORY LOW
TROUBLE FAILURE BATTERY
3 4 5
AREA 1 SYSTEM EVENT/TROUBLE
KEYPAD KEYPAD
KEYPAD
FIRE AUX. *
TAMPER
3 4 5
AREA 2 SYSTEM EVENT/TROUBLE
KEYPAD KEYPAD
KEYPAD
FIRE AUX. *
TAMPER
3 4 5
U D
or to save.
X
GEM-P816 Programming Instructions
!
Page 17
EZM Bell
AC FAIL
TAMPER Superv
6 7 8
FAIL TO FAIL TO
Keyfob
OPEN CLOSE
Low Batt
6 7 8
FAIL TO FAIL TO
Keyfob
OPEN CLOSE
Low Batt
6 7 8
U D
or to