Partial Or Incorrect Printing - BadgePass NXT5000 User Manual

Document History

Partial or incorrect printing

1. Check the print settings
Check that no area of the card design to be printed is outside the print margins.
Check the document orientation (portrait or landscape) in the BadgePass Print Suite configuration.
2.
Check the interface cable
If irregular characters are printed, check that you are in fact using the USB cable supplied with your printer.
Check the connection between the computer and the printer.
Try using another cable of the same type.
3.
Check that the printer is clean
Clean the printer, especially the cleaning roller.
See the maintenance section.
4.
Check that the cards are clean
Store your cards protected from dust.
5.
Check the ribbon
Check that the ribbon is fitted correctly.
Check that the ribbon spools freely.
6.
Check the print head
Should horizontal straight lines appear on printed cards, it is likely that the print head is dirty or damaged.
See the section on maintenance and troubleshooting. If the problem persists, contact a BadgePass dealer or visit the
website at www.badgepass.com.
BadgePass NXT5000 USER GUIDE
Page 40