BadgePass NXT5000 User Manual page 24

Document History
6.
Remove any cards present in the feeder.
7.
Double click the cleaning button on the control panel before inserting the cleaning card.
8.
Remove the film from the adhesive card
9.
The used cleaning card is ejected automatically into the output hopper.
6
Routine cleaning may also be carried out from the BadgePass Print Suite by clicking on "Start cleaning".
Before using your printer, remember to reset the gauge to the desired card thickness.
1
and insert the cleaning card into the feeder as shown, adhesive side up
8
BadgePass NXT5000 USER GUIDE
2
. Cleaning starts.
7
9
Page 24