BadgePass NXT5000 User Manual page 23

Document History
Follow the procedure below to ensure you have carried out regular cleaning properly:
Repeatedly running the adhesive card through the printer cleans the cleaning roller in order to maintain print quality and increases the service life of the print head.
1.
Open the printer cover.
2.
Remove the ribbon as shown on the diagram.
3.
Close the cover and check it has clicked shut.
4.
Open the feeder of the printer.
5.
Using the lever, set the card thickness to the MAX position.
1
3
BadgePass NXT5000 USER GUIDE
2
4 5
Page 23