Removing Printed Cards; Adjusting Card Thickness - BadgePass NXT5000 User Manual

BadgePass NXT5000 USER GUIDE
Document History

Removing printed cards

Once the print cycle is complete, cards are delivered into the output hopper below the card feeder. This output hopper is designed to collect the printed and/or encoded cards. The
printer is equipped with an output hopper with a maximum capacity of 100 x 0.76 mm cards.

Adjusting card thickness

The printer is equipped with a manual card thickness adjustment mechanism which can be reached through the card feeder when open. The printer accepts cards between 0.25
mm and 1.25 mm thick (10 to 50 mil). The factory setting is 0.76 mm.
Page 10