BadgePass NXT5000 User Manual page 29

Document History
9.
Remove the "T" shaped card, then remove the film from the adhesive cleaning card 1 and insert the cleaning card into the feeder as shown, adhesive side up 2 Cleaning starts.
10.
The used adhesive card is ejected automatically into the output hopper.
Routine cleaning may also be carried out from the BadgePass Print Suite by clicking on "Start cleaning".
Warning, the "T" shaped card must be used just after the sachet is opened.
Before using your printer, wait for 2 minutes after cleaning is complete. Also, please remember to reset the adjustment gauge to the desired card thickness.
9
BadgePass NXT5000 USER GUIDE
10
Page 29