Getting Started - BadgePass NXT5000 User Manual

Document History

Getting started

1-1 Unpacking
Your printer is supplied with several accessories that we ask you to look at closely. This list may vary depending on your location.
The printer is shipped in special packaging designed to prevent damage during transit. If you notice any visible damage, please contact the shipper and immediately inform your
BadgePass dealer, who will tell you the procedure to follow. BadgePass takes great care over the quality of its packaging and we ask that you keep this packaging somewhere
clean and dry.
You will be asked for the full original packaging (outer box, inner wedges and protective bags) in the event that the printer is returned. If the printer is returned
without its original packaging and components are damaged in transit, these components will no longer be covered by the warranty. You will be charged
for new packaging for shipping the printer back to you.
Accessories supplied with your printer:
• Power supply unit - SWITCHBOX Type F10723-A or CWT Type KPL-065M.
• Main power cable.
• USB cable.
• Reject box.
• Installation, documentation and software CD-ROM.
• Starter cleaning kit.
• Quick installation guide.
• Warranty notice.
If any of these components are missing, please contact your BadgePass dealer. Use only the power supply unit supplied with your BadgePass printer.
SWITCHBOX Type F10723-A or CWT Type KPL-065M. Use only the USB cable supplied with your BadgePass printer.
The BadgePass printer must be placed in a dry location, protected from dust, and also well-ventilated. Take care to keep your printer on a flat, sturdy surface
able to bear its weight.
BadgePass NXT5000 USER GUIDE
Page 4