Advanced Cleaning - BadgePass NXT5000 User Manual

Document History

3-3 Advanced cleaning

For a more in-depth clean, we recommend carrying out an advanced clean every five routine cleaning cycles. BadgePass provides a BadgePass High Trust® maintenance kit
consisting of 2 adhesive cards, 2 impregnated "T" shaped cards, a cleaning pen, and a box of 60 wipes. The "T" shaped card is used to clean the card feed rollers and the magnetic
encoder head. To ensure advanced cleaning is carried out properly, the procedure given below must be followed.
3-3a Printer cleaning
Recommended cleaning cycle: every 5 routine cleaning cycles. Servicing accessory: impregnated "T" shaped card and adhesive card.
Follow procedure below:
1.
Open the printer cover.
2.
Remove the ribbon as shown on the diagram.
3.
Close the cover and verify that it has clicked shut.
4.
Open the card feeder of the printer.
1 2 3
BadgePass NXT5000 USER GUIDE
4
Page 27