Maintenance; General Warranty Information - BadgePass NXT5000 User Manual

BadgePass NXT5000 USER GUIDE
Document History

Maintenance

3-1 General warranty information

Your BadgePass printer has been designed to give you a long service life and needs only minimal regular maintenance. Please comply with the instructions given below to
ensure proper operation of your printer.
Keep your warranty cover!
The manufacturer's warranty is subject to strict adherence to the routine servicing and maintenance instructions, and in particular the printer cleaning cycles.
Any failure to follow the maintenance and servicing procedures described in this section voids the print head warranty.
BadgePass declines any liability where there has been a failure to carry out required maintenance on the printer. The print head is a wearing part and an extremely sensitive
printer component. Its useful life can be seriously curtailed by the presence of dust, liquids or solids in the printer's immediate environment, on the print head or on the cards.
Users must take all necessary precautions to insert only clean cards, free of dust deposits or foreign bodies, into the machine. The frequency and quality of cleaning are
decisive factors enabling users to extend the print head's useful life and to ensure excellent print quality. Particular care must therefore be taken with cleaning. Users must
comply with the servicing and maintenance instructions as fully described in this section.
In addition, the use of BadgePass brand ribbons also ensures that your equipment operates properly. Use of ribbons not approved by BadgePass may as a consequence
affect the quality and reliability of print jobs, produce low quality printed output and even affect the printer's operation. The manufacturer's warranty does not cover physical
damage or quality problems caused by using non-BadgePass approved ribbons.
BadgePass provides replacement parts and consumables that you can refer to within this user guide or by visiting the website at www.badgepass.com.
Page 21