Appliance Setup; Remove Glass Assembly; Remove Shipping Materials; Clean The Appliance - Heatilator ICON60IT Owner's Manual

12 12

Appliance Setup

A. Remove Glass Assembly
See Section 12.I.
B. Remove Shipping Materials
• Remove shipping materials from inside or underneath the
fi rebox.
• Front refractory (three pieces) package shipped in front
of glass.
• Three top logs and ember materials package shipped
inside fi rebox.
C. Clean the Appliance
Clean/vacuum any sawdust that may have accumulated in-
side or underneath the fi rebox.
D. Accessories
Install approved accessories per instructions included with
accessories. Refer to Section 16.D.
Note: This appliance requires the use of a decorative
screen front (not provided with the appliance).
WARNING
Shock Risk
Fire Risk
Use ONLY optional accessories approved
for this appliance.
• Using non-listed accessories voids
warranty.
• Using non-listed accessories may result
in a safety hazard.
• Only Hearth & Home Technologies
approved accessories may be used
safely.
E. Refractory
All refractory internal to the fi rebox comes pre-installed. See
Section 12.J. for installation of bottom front and side refrac-
tories.
Heatilator • ICON DV • 4042-300 Rev R • 06/07 35