Optional Decorative Screen Front; Air Shutter Setting - Heatilator ICON60IT Owner's Manual

K. Optional Decorative Screen Front
Install Screen Front
• Place lower edge of screen front into slots on lower face
of appliance. See Figure 12.17.
• Rotate top of front towards the appliance. Front will snap
into place.
Remove Screen Front
• Locate spring pins in upper LH and RH corners of front.
Pull down on pin to release front and rotate top of front
away from appliance.
Figure 12.17 Installing Screen Front
40 Heatilator • ICON DV • 4042-300 Rev R • 06/07
L. Air Shutter Setting
This appliance has an adjustable air shutter which controls
the primary air. Adjustment of the air shutter may be neces-
sary to obtain optimal fl ame appearance. This should be
adjusted by a qualifi ed installer at the time of installa-
tion.
The air shutter is located in the left column behind the junc-
tion box access panel.
By pulling the air shutter knob up, you will be closing the air
shutter. Care should be taken when adjusting the air shut-
ter so the appliance does not soot. If sooting occurs the air
shutter will need to be opened by pushing the knob down.
See Figure 12.18.
Figure 12.18 Air Shutter Adjustment
Closed
Open